Singularity Configuration Files¶
As a Singularity Administrator, you will have access to various configuration
files, that will let you manage container resources, set security restrictions
and configure network options etc, when installing Singularity across the system.
All these files can be found in
/usr/local/etc/singularity by default (though
its location will obviously differ based on options passed during the
installation). This page will describe the following configuration files and
the various parameters contained by them. They are usually self documenting
but here are several things to pay special attention to:
Most of the configuration options are set using the file
that defines the global configuration for Singularity across the entire system.
Using this file, system administrators can have direct say as to what functions
the users can utilize. As a security measure, it must be owned by root and must
not be writable by users or Singularity will refuse to run.
The following are some of the configurable options:
To use containers, your users will have to have access to some privileged system
calls. One way singularity achieves this is by using binaries with the setuid
bit enabled. This variable lets you enable/disable users ability to utilize
these binaries within Singularity. By default, it is set to “Yes”, but when
disabled, various Singularity features will not function (e.g. mounting of the
Singularity image file format).
USER BIND CONTROL:
This allows admins to enable/disable users to define bind points at runtime.
By Default, its “YES”, which means users can specify bind points, scratch and
Used for setting of automatic bind points entries. You can define a list
of files/directories that should be made available from within the container.
If the file exists within the container on which to attach to use the path
bind path = /etc/localtime
You can specify different source and destination locations using:
bind path = /etc/singularity/default-nsswitch.conf:/etc/nsswitch.conf
Should be set to “YES”, if you want to automatically bind mount /dev
within the container. If set to ‘minimal’, then only ‘null’, ‘zero’,
‘random’, ‘urandom’, and ‘shm’ will be included.
To automatically determine the calling of user’s home directory and
attempt to mount it’s base path into the container.
There are several ways in which you can limit the running of containers in your system:
LIMIT CONTAINER OWNERS: Only allow containers to be used that are owned by a given user.
LIMIT CONTAINER GROUPS: Only allow containers to be used that are owned by a given group.
LIMIT CONTAINER PATHS: Only allow containers to be used that are located within an allowed path prefix.
These features will only apply when Singularity is running in SUID mode and the user is non-root. By default they all are set to NULL.
singularity.conf file is well documented and most information can be
gleaned by consulting it directly.
Cgroups or Control groups let you implement metering and limiting on the resources used by processes. You can limit memory, CPU. You can block IO, network IO, set SEL permissions for device nodes etc.
--apply-cgroups option can only be used with root privileges.
When you are limiting resources, apply the settings in the TOML file by using
the path as an argument to the
--apply-cgroups option like so:
$ sudo singularity shell --apply-cgroups /path/to/cgroups.toml my_container.sif
To limit the amount of memory that your container uses to 500MB (524288000 bytes):
[memory] limit = 524288000
Start your container like so:
$ sudo singularity instance start --apply-cgroups path/to/cgroups.toml my_container.sif instance1
After that, you can verify that the container is only using 500MB of memory.
(This example assumes that
instance1 is the only running instance.)
$ cat /sys/fs/cgroup/memory/singularity/*/memory.limit_in_bytes 524288000
Do not forget to stop your instances after configuring the options.
Similarly, the remaining examples can be tested by starting instances and
examining the contents of the appropriate subdirectories of
Limit CPU resources using one of the following strategies. The
of the configuration file can limit memory with the following:
This corresponds to a ratio versus other cgroups with cpu shares. Usually the
default value is
1024. That means if you want to allow to use 50% of a
single CPU, you will set
512 as value.
[cpu] shares = 512
A cgroup can get more than its share of CPU if there are enough idle CPU cycles available in the system, due to the work conserving nature of the scheduler, so a contained process can consume all CPU cycles even with a ratio of 50%. The ratio is only applied when two or more processes conflicts with their needs of CPU cycles.
You can enforce hard limits on the CPU cycles a cgroup can consume, so
contained processes can’t use more than the amount of CPU time set for the
quota allows you to configure the amount of CPU time that a cgroup
can use per period. The default is 100ms (100000us). So if you want to limit
amount of CPU time to 20ms during period of 100ms:
[cpu] period = 100000 quota = 20000
You can also restrict access to specific CPUs and associated memory nodes by
[cpu] cpus = "0-1" mems = "0-1"
Where container has limited access to CPU 0 and CPU 1.
It’s important to set identical values for both
You can limit and monitor access to I/O for block devices. Use the
[blockIO] section of the configuration file to do this like so:
[blockIO] weight = 1000 leafWeight = 1000
leafWeight accept values between
weight is the default weight of the group on all the devices until and
unless overridden by a per device rule.
leafWeight relates to weight for the purpose of deciding how heavily to
weigh tasks in the given cgroup while competing with the cgroup’s child cgroups.
devices you would do something like this:
[blockIO] [[blockIO.weightDevice]] major = 7 minor = 0 weight = 100 leafWeight = 50 [[blockIO.weightDevice]] major = 7 minor = 1 weight = 100 leafWeight = 50
You could limit the IO read/write rate to 16MB per second for the
block device with the following configuration. The rate is specified in bytes
[blockIO] [[blockIO.throttleReadBpsDevice]] major = 7 minor = 0 rate = 16777216 [[blockIO.throttleWriteBpsDevice]] major = 7 minor = 0 rate = 16777216
The execution control list is defined here. You can authorize the containers by validating both the location of the SIF file in the file system and by checking against a list of signing entities.
[[execgroup]] tagname = "group2" mode = "whitelist" dirpath = "/tmp/containers" keyfp = ["7064B1D6EFF01B1262FED3F03581D99FE87EAFD1"]
Only the containers running from and signed with above-mentioned path and keys will be authorized to run.
Three possible list modes you can choose from:
Whitestrict: The SIF must be signed by ALL of the keys mentioned.
Whitelist: As long as the SIF is signed by one or more of the keys, the container is allowed to run.
Blacklist: Only the containers whose keys are not mentioned in the group are allowed to run.
When a container includes a GPU enabled application and libraries, Singularity
--nv option) can properly inject the required Nvidia GPU driver
libraries into the container, to match the host’s kernel. This config file is
the place where it searches for NVIDIA libraries in your host system.
nvliblist.conf will be ignored in case of having nvidia-container-cli
installed, which will be used to locate any nvidia libraries and binaries on
the host system.
For GPU and CUDA support –nv option works like:
$ singularity exec --nv ubuntu.sif gpu_program.exec $ singularity run --nv docker://tensorflow/tensorflow:gpu_latest
You can also mention libraries/binaries and they will be mounted into the
container when the
--nv option is passed.
Singularity provides full support for granting and revoking Linux capabilities
on a user or group basis. By default, all Linux capabilities are dropped when a
user enters the container system. When you decide to add/revoke some capabilities,
you can do so using the
Singularity capability options:
For example, if you do:
$ sudo singularity capability add --user david CAP_SYS_RAWIO
You’ve let the user David to perform I/O port operations, perform a range of device-specific operations on other devices etc. To perform the same for a group of users do:
$ sudo singularity capability add --group mygroup audit_write
drop in the same format for revoking their capabilities.
To see a list of all users and their capabilities, simply do:
$ sudo singularity capability list --all
capability.json is the file maintained by Singularity where the
commands create/delete entries accordingly.
To know more about the capabilities you can add do:
$ singularity capability add --help
The above commands can only be issued by root user(admin).
The –add-caps and related options will let the user request the capability when executing a container.
Secure Computing (seccomp) Mode is a feature of the Linux kernel that allows an administrator to filter system calls being made from a container. Profiles made up of allowed and restricted calls can be passed to different containers. Seccomp provides more control than capabilities alone, giving a smaller attack surface for an attacker to work from within a container.
You can set the default action with
defaultAction for a non-listed system
SCMP_ACT_ALLOW filter will allow all the system calls if it
matches the filter rule and you can set it to
SCMP_ACT_ERRNO which will have
the thread receive a return value of errno if it calls a system call that matches
the filter rule.
The file is formatted in a way that it can take a list of additional system calls
for different architecture and Singularity will automatically take syscalls
related to the current architecture where it’s been executed.
caps section will include/exclude the listed
system calls if the user has the associated capability.
--security option to invoke the container like:
$ sudo singularity shell --security seccomp:/home/david/my.json my_container.sif